ZMS power cables XLPE low voltage power cables are mainly used for power transmission and distribution in 0.6 / 1kv or lower output power systems. 

Its applications include building electricity, factories, mines, petrochemicals, and electronic communications.

No matter what kind of application requirements you have for the product. 

Our products are able to withstand different degrees of mechanical external force or tension according to different laying environments and set different parameter standards to meet these different application requirements to ensure that they can perform the job of the product with excellence.

Low Voltage Cable Structure

It is generally composed of three parts: core, insulation, and protection layer.

The core used to conduct current is generally made of multiple strands of copper or aluminum strands stranded together. Power Cable Low Voltage has single-core, double-core, three-core, four-core, and other types.

Two-core cables are used for single-phase lines, three-core and four-core cables are used for three-phase three-wire lines and three-phase four-wire lines respectively, while single-core cables can be used for single-phase lines or three-phase lines as required. 

Commonly used XLPE Low-Voltage Power Cables core cross-sectional area of 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240 mm, etc.

Insulation Layer

The insulation layer is usually made of oil-impregnated paper, plastic, rubber, etc.

1 Paper-insulated cables are cables made of impregnated cable paper as the insulation layer, generally known as paper-insulated cables.

The case of paper impregnation can be divided into ① oil-impregnated paper-insulated cable; ② dry insulation cable; ③ non-drip cable.

2 Insulation layer made of thermoplastic extrusion cross-linked cable, generally known as plastic cable, widely used.
Plastic cable can be divided into three kinds of PVC cable, polyethylene cable, and cross-linked polyethylene cable.
Natural butyl rubber, butyl rubber and ethylene propylene rubber, and other materials for the insulation layer of the cable is called rubber cable.
The voltage level of 1 kV for low-voltage cables can be used paper insulated cables and plastic cables, more plastic cables; a voltage level of 0.5 kV for low-voltage cables more rubber cables. 

Protective Layer

It is a layer or layers of metal or non-metallic material covering the outside of the cable.

The protective layer is used to protect the insulation layer in the process of transportation, laying, and use, from external damage and moisture intrusion.

1 Paper insulated cable protection layer. The paper-insulated cable protection layer is divided into two parts: the inner and outer sheathing.

2 Plastic cable protection layer. Usually in the plastic insulation outside the use of PVC sheath.
3 The protective layer of rubber cable. Rubber cable inner sheath of PVC sheath, neoprene sheath (non-combustible rubber), and lead package three, the outer sheath is divided into steel belt armor, rubber sheath, and plastic sheath three.

If you have any questions about the product selection of Low Voltage Power Cables, you can email us and we will introduce you to a professional sales representative from ZMScable.

Low Voltage Cable Advantages

Good Durability

One of the unique advantages of low-voltage cross-linked cable, since it entered the market, is its good durability.

The use of the process will not appear in the use of short time, high temperature and easy corrosion, and other undesirable problems.

With High Efficiency

Cross-linked cables use a new low-voltage and high-efficiency circuit transportation mode, which improves the speed of circuit transportation during line transportation and makes the process of circuit transportation safer and more efficient.

Easy to Operate

Another major advantage of low-voltage cross-linked cables is that cross-linked cables are extremely easy to operate in the process of use, low-voltage cross-linked cables continue to make technical breakthroughs and innovations.

There is no doubt that the cable's internal structure is finely designed and easy to operate the many advantages that make the majority of consumers choose it.

Description of ZMS Cable Products

0.6/1 kV Cu(AL)/XLPE/SWA(STA)/PVC Power Cable

ZMS Cable's multi-core PVC low-voltage power cables have good electrical and mechanical properties, optimal chemical resistance, environmental stress, and flame retardancy.

In addition, its simple structure and ease of use save engineering costs.

It is suitable for laying indoors, in tunnels, canals, and underground laying areas.

CONSTRUCTION

Conductor: Class 2 stranded copper conductor

Insulation: XLPE (Cross-Linked Polyethylene)

Bedding: PVC (Polyvinyl Chloride)

Armour: SWA (Steel Wire Armour)

Sheath: PVC (Polyvinyl Chloride)

STANDARDS: IEC 60502, IEC 60228, (IEC 60332-3 only for FR type), or other standards such as BS, DIN, and ICEA requirements.

0.6/1kv LV ABC(Aerial Bundled Cable)

APPLICATIONS
Low voltage ABC cable, which is a weather-resistant PVC, HDPE, and XLPE insulated overhead cable with copper, aluminum, or aluminum alloy cores.
It is suitable for overhead power lines with AC rated voltage Uo/U 0.6/1KV and below, with conductor temperature not exceeding 75°C for polyethylene insulated conductors or not exceeding 90°C for cross-linked polyethylene (XLPE) insulated conductors.
It is widely used in transmission and distribution lines of various voltage levels because of its low installation, maintenance, and operation costs.
Also, they have good corrosion resistance, so they are often used across river valleys and coastal areas.

STRUCTURE

Insulation: PVC, HDPE, XLPE

Conductor: Copper, aluminum, aluminum alloy.

Insulation layer: PVC, HDPE, XLPE

CHARACTERISTICS

Voltage Rating: 0.6/1kV

Test Voltage: 4kV

Operating Temperature: -40°C to +90°C

Minimum Bending Radius: 18 x overall diameter

Sheath Colour: Black

Core Identification: Phases by longitudinal ribs (I, II, III)

Neutral core by longitudinal ribs (≤ 50 mm2 min.12 ribs; ≥ 50 mm2 min.16 ribs) 

STANDARDS: IEC 61089, BS 7870, DIN 48201, ASTM B399, BS EN50183, NFC33-209

0.6/1kv Concentric Power Cable

Low voltage XLPE insulated copper core concentric cable is commonly used as energy supply cable.
It can be used overhead, outdoors, or buried underground.
It is most commonly used for power distribution systems, street lighting, temporary power for buildings, etc. The composition of concentric cables can be single-core or multi-core, depending on the different application tasks.
Distribution Network Operators (DNOs) use it when providing the final connection to a domestic property.
Providing final connections to domestic properties, also suitable for secondary distribution, especially for use in high-rise buildings and street lighting systems.

CONSTRUCTION
Conductor: 8000 Series aluminum alloy/Copper class 2
Insulation: XLPE (Cross-Linked Polyethylene)
Cable Inner Sheath: PVC
Cable Tape: Non-absorbent material or OEM
Cable Outer Sheath: XLPE/PVC/PE

Sheath Colour: Black

CHARACTERISTICS

Voltage Rating: Uo/U 0.6/1kV

Temperature Rating: -15°C to +70°C

Minimum Bending Radius: 8 x overall diameter 

STANDARDS: ASTM-B; ASTM-D; UL; BS 7870-3-11, EN 60228

0.6/1kV Copper Conductor Single Core AWA LSZH Cable

APPLICATION

Single core LSZH cable with aluminum wire armor (AWA). Power and auxiliary fixed wiring cables for use in power networks, underground, outdoor, and indoor applications, and for use in cable ducting. 

For installation where fire, smoke emission, and toxic fumes create a potential threat to life and equipment.

CHARACTERISTICS

Voltage Rating: Uo/U 0.6/1kV

Temperature Rating Fixed: -20°C to +90°C

Minimum Bending Radius Fixed: 6 x overall diameter

CONSTRUCTION

Conductor: Class 2 stranded copper conductor

Insulation: XLPE (Cross-Linked Polyethylene)

Bedding: LSZH (Low Smoke Zero Halogen)

Armour: AWA (Aluminium Wire Armour)

Sheath: LSZH (Low Smoke Zero Halogen)

Core Identification: Brown

Sheath Colour: Black

STANDARDS: BS 6724, IEC/EN 60502-1, EN 60228

In addition to the above common XLPE/SWA/PVC CU Armored Cable LV Power Cable types, LV power cable types are generally also divided into low-voltage PVC insulated cables, low-voltage XLPE insulated cables, low-voltage rubber insulated cables, etc. according to their insulation types. 

Also according to their different types of work and properties, they can be divided into power cables, overhead bundled power cables, low-voltage lighting cables, special low-voltage power cables, and anti-(fire) power cables.

Quality Certification Service

An international electric cable manufacturer, we have the best LV XLPE Power Cable for sale, and other high quality international standard power cables. We are a Custom LV XLPE cable manufacturer.

ZMS Cable Company has many cable types and all products are manufactured according to international standards such as GB, IEC, BS, NFC, ASTM, DIN, etc.

Our technical team can customize the cable products to meet your requirements and provide professional LV copper concentric wire at a good price according to your needs.

Professional Customer Service

As a professional low-voltage cable supplier, ZMS offers free professional consulting services.

If you don't know how to choose the right cable product, or if you don't find the type and size of cable you need on this page.

You can provide us with the following information: cable voltage, conductor material, insulation and sheath material, shielding type, armor type, etc.
Or you can also provide the cable installation environment, application requirements, etc.
We will serve you wholeheartedly. We help you with one-stop project solution services and fast product delivery solutions.

ZMS Packaging

The packaging of ZMS cables is provided in wooden rolls, corrugated cartons, and reels. 

The cable ends are sealed with BOPP self-adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture.

We can print the required markings on the outside of the drums with waterproof material according to the customer's requirements.