Cable Construction

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Application

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground, and in water as well as for installation on cable trays for industries, switchboards, and power stations.

Due to the good laying characteristic, this cable can also be installed in difficult line guideways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

XLPE-insulated copper wire screen power cables to IEC 60502

Temperature Range

During installation up to -5°C/+23°F

Operating Temperature

Max. +90°C/+194°F

Short Circuit Temperature

+250°C/+482°F (short circuit duration up to 5 sec.)

Nominal Voltages

U0/U 6/10 kV, 12/20 kV, 18/30 kV

Operating Voltages for

6/10 kV = max. 12 kV

12/20 kV = max. 24 kV

18/30 kV = max. 36 kV

Test Voltages for

6/10 kV = 15 kV

12/20 kV = 30 kV

18/30 kV = 45 kV

Minimum Bending Radius

During Installation Max. 15x Cable Ø

Power Rating Table

See Technical Information